4w quad snow plow vehicle layout
Four-wheel drive snow removal vehicle, the upper body is composed of a snow melting spreader, snow removal brush, snow removal shovel, electrical system, hydraulic system and other accessories.
Functional purpose and characteristics
The front snow removal shovel of the car can be used interchangeably with snow sweeping brushes. When the snow is thick, use the sweeping brush to sweep it to both sides of the road. Rear-mounted snow-melting spreader, during the process of snow removal in winter, the spreader sprinkles snow-melting agents to prevent the wet and slippery road from freezing and affecting traffic. A road covered with snow-melting agents can solve the problem of road icing.
Thereby, the vehicle can pass safely without being affected by the weather. This product is more energy-saving and economical, and the vehicle is easy to operate, with a wide range of operations, maneuverability, flexibility, and high efficiency.
The snow plow has the following characteristics:
——The vehicle body is streamlined and beautiful in appearance;
——Sweeping and shoveling snow in winter, and spraying deicing agent on the tail to prevent the inside from freezing. Goods can be transported in other seasons.
——The snow shovel has high rigidity, good stability, smooth movement, mechanical removal of the road surface, and reliable work;
——Adopt four-wheel drive, strong power, front, and rear drive are suitable for snow operations;
——The hydraulic system has a fast dynamic response, high work efficiency, short cycle time, simple operation, reliable work, and low failure rate;
——Snow removal roller brush has a large diameter, long service life, and convenient and quick replacement;
——Intelligent operation; one-button operation of the electric control box in the cab.
——Screw conveying method, etc., with strong stability and uniform spreading.
Features:
1. Structural description of shovel plate
1.1. The snow removal shovel is composed of a shovel plate, shovel blade, hydraulic system, electric control, swing frame, lifting system, obstacle avoidance system, tension spring bracket, mounting seat assembly, lighting, etc.
1.2. Description of obstacle avoidance system: When the shovel edge encounters road spikes, deceleration bumps, seams, and foreign objects, the snow removal shovel can be turned over to avoid obstacles under the action of external force and reset automatically. The shovel body can swing left and right to automatically adapt to the road surface.
1.3. One-time die-casting of shovel plate. Install 4 sets of stiffeners at the rear. Integral welding.
1.4. The connection between the shovel blade fixing seat and the shovel plate is fixed with nuts, which is easy to replace.
1.5. Storage feet: fixed on both sides of the brush head. In the non-working state, just pull out the fixing pin to store the snow shovel. In the working state, the legs can be directly retracted and fixed on the cover body.
1.6. Forced down pressure protection function.
2. Description of blade
The blade is made of wear-resistant manganese steel, which has a long service life. Wear-resistant plastic steel can also be used.
3. The hydraulic system said
DC electric hydraulic unit assembly, internal triple valve electronically controls up, down, left, and right adjustments.
4. Description of main features:
4.1. Reasonable structure: plate-type snow removal shovel, the two-way angle can be adjusted at will.
4.2. Reliable performance: hydraulic operation, is convenient and reliable. A down pressure protection device is installed.
4.3. Strong adaptability: suitable for all kinds of trucks.
4.4. Easy operation: the electric control operation in the cab is convenient and reliable.
4.5. Unique obstacle avoidance: the upper part of the snow removal plate is integral, and the avoidance function adopts the form of an integral lower flap. When the snow removal shovel blade is arbitrary
5. Roller brush bristle instructions
5.1. Bristle material: pure plastic bristles plus curved steel wire, the tensile strength of a single bristle is ≥1000N.
5.2. Brush hair treatment process: The surface of a single brush filament adopts a corrugated treatment process, which has good elasticity and anti-breakage performance.
5.3. Strong durability: brush filaments combined with more than two materials can clean thoroughly and have a long service life.
Written by: JZ POWER
The Exporter and Manufacturer of Scooters, Snow Equipment since 2003
Welcome OEM ODM
https://www.atvsnowthrowers.com/
